HB2250 1200mm D Pull (19mm Rod)

The HB2200 Series of pulls handles are manufactured from solid brass to provide a classic look for glass, timber, and aluminium doors. Pulls come in a range of lengths (300mm, 600mm and 1200mm) with a 19mm rod diameter. The smaller HB2230 300mm D Pull comes in a finer 16mm diameter rod perfect for use on internal doors and cabinetry.

All pulls can be used as through fix, back to back pairs, and have fittings for use on glass doors. The addition of the HB2260 Knob provides both a finishing detail, and can be used similar to a cabinet knob when the pull is required to one side of the door only. 

Our D Pulls are fabricated from solid brass, and as such they are heavy.  For cabinetry thickness doors (18-25mm) where a pull is required to one side of a door or drawer only, we recommend using shorter lengths, or for longer lengths using the through fix sets for optimum stability.  We advise using the optional flange/rose on all single side fixing, and on installations into soft woods such as cedar and pine.

Please note: For single side fixing on aluminium doors please contact your local Halliday + Baillie representative.

Material: Solid Brass Rod, Solid Stainless Steel fixings

Dimensions: 19mm Rod,1200mm centre to centre measurement.

Finished in Aged Brass (AB), Polished Brass (PB), and Satin Brass (SB). All brass finishes are unlacquered allowing graceful aging over time. Additional custom finshes by request - please see your local Halliday + Baillie dealer for more information.

Product code: HB2250

Please click here for the HB2200 D Pull Series data sheet:AA HB2200 Series.pdf
Please click here for Back to Back Fixing:AA HB 2220 Back to Back Kit.pdf


Please click here for Single Side Face Fixing:AA HB 2220 Face Fix Kit.pdf
Please click here for Back to Back Glass Fixing:AA HB 2220 Glass Back to Back.pdf


Please click here for Single Side Glass Fixing:AA HB 2220 Glass Fix Kit.pdf