HB1940 Series Large Rectangle Sliding Lock 30mm Backset

Designed for where a sense of scale is required, the HB1940 Series is a set with more impact than the traditional size recessed handle. The deeper finger grip in the flush pull make these an ideal choice for thicker timber sliding doors, and being fabricated from zinc diecast allows for cost effective use in both commercial and residential projects.

The sets utilise the HB1920 or HB1930 flush pulls, and the HB2010 30mm backset sliding lock body.

For a deadbolt version with 30mm backset please see the HB1950 Series.

Also available in 55mm backset (see the HB1960 Series).

Material : zinc diecast, solid brass
Backset : 30mm
Minimum door thickness : 38mm (technically these sets will fit in a door thickness of 32mm however due to their size and weight we recommend a minimum of 38mm)
Flush pulls : 250mm x 125mm x 15mm Suitable for timber doors

For finish options please see our current Finishes Sheet. Please check with your local Halliday + Baillie representative as not all finishes are available in all regions.

Glue, epoxy, silicone products etc are not required or recommended for installation, and may void warrantee.

HB 1940 – Sliding Lock Set, HB 2010 Body, HB 1930 Keyhole Pull Both Sides
HB 1942 – Sliding Lock Set, HB 2010 Body, HB 1930 Keyhole One Side, Blank Outside
HB 1943 – Sliding Lock Set, HB 2010 Body, HB 1930 Keyhole One Side Only

Product code: HB 1940

Please click here for the HB1940 Series data sheet:AA HB1940.pdf
Please click here for the Halliday + Baillie Finishes Sheet:AA HBFinishes All.pdf