HB632 Sliding Door Lock - 250mm

The HB632 is a configuration of the HB630 lock with a snib and key on the inside and a matching blank flush pull on the outside on a 55mm backset sliding lock body. Cylinders to be ordered separately with confirmation of the door thickness.

Material: Diecast zinc with brass and 316 stainless steel

Backset : 55mm

Minimum door thickness : 38mm

Flush pulls : 250mm x 36mm x 13mm

Suitable for timber or aluminium doors

For finish options please see our current Finishes Sheet. Please check with your local Halliday + Baillie representative as not all finishes are available in all regions.

Glue, epoxy, silicone products etc are not required or recommended for installation, and may void warrantee.

Configurations:
HB 630 – Key and Snib Both Sides
HB 632 – Key Snib In, Blank Out
HB 633 – Key Snib In, No Pull Out

Product code: HB 632

Please click here for the HB630 Series data sheet:AA HB630.pdf
For installation in timber doors, please click here for the HB604 Timber Fixing Kit data sheet:A HB604.pdf
Please click here for the Halliday + Baillie Finishes Sheet:AA HBFinishes All.pdf