%label%
%sku%%description%
- / Product overview
HB1650 250mm Offset Flush Pull Lock for Sliding Doors – 55mm Backset
The HB1650 Pivot Door Set series has been developed primarily for use on large pivot doors as a medium sized option smaller than the 310mm length HB 1480 Series.
All HB1650 come as left or right handed sets, with various functions including a privacy option. See below for order code and function details.
For pivot, hinge and bi-fold doors please see the HB1650D set with deadbolt.
Material: Zinc die cast and brass
Backset : 2.17″
Minimum door thickness : 1.77″
Flush pulls : 9.84″ x 1.81″ x 0.67″
Internal grip depth : 0.59″
Suitable for timber or aluminum doors of suitable thickness.
For finish options please see our current Finishes Sheet. Please check with your local Halliday + Baillie representative as not all finishes are available in all regions.
Flush pulls are designed to be mounted with the body within the thickness of the door, and the face plate on the door surface – total projection is 2mm. Fully recessed mounting is possible on timber doors with the appropriate door thickness. Using glue, epoxy or silicone products etc to secure flush pulls to the door is not required or recommended for installation, and may void warrantee. Glue, epoxy, or silicone products can be used to secure the spindle bar to the back of the snib flush pull for example where sets have a flush pull to one side only.
Configurations:
HB1650 – Privacy Set, Snib In, Emergency Release Out, HB690 Standard Body
HB1652 – Snib Inside, Blank Out, HB690 Standard Body
HB1653 – Snib Inside, Nothing Out, HB690 Standard Body
HB1654 – Snib Both Sides, HB690 Standard Body
- / Product downloads
Resources
- / Related products