HB1940 250mm Large Rectangle Flush Pull Sliding Door Lock - 30mm Backset
The deeper finger grip in the flush pull make these an ideal choice for thicker timber sliding doors, and being fabricated from zinc diecast allows for cost effective use in both commercial and residential projects. The sets utilise the HB1920 or HB1930 flush pulls, and the HB2010 30mm backset sliding lock body.
For a deadbolt version with 30mm backset please see the HB1950 Series. Also available in 55mm backset (see the HB1960 Series).
Material : zinc diecast, solid brass
Backset : 30mm
Minimum door thickness : 38mm (technically these sets will fit in a door thickness of 32mm however due to their size and weight we recommend a minimum of 38mm)
Flush pulls : 250mm x 125mm x 15mm Suitable for timber doors.
Please Note: This is a run-out product. There is limited stock available, and once sold no more will be made. Please contact your local Halliday & Baillie representative for stock and finish information.
For finish options please see our current Finishes Sheet. Please check with your local Halliday + Baillie representative as not all finishes are available in all regions.
Flush pulls are designed to be mounted with the body within the thickness of the door, and the face plate on the door surface – total projection is 2mm. Fully recessed mounting is possible on timber doors with the appropriate door thickness. Using glue, epoxy or silicone products etc to secure flush pulls to the door is not required or recommended for installation, and may void warrantee. Glue, epoxy, or silicone products can be used to secure the spindle bar to the back of the snib flush pull for example where sets have a flush pull to one side only.
HB 1940 – Sliding Lock Set, HB 2010 Body, HB 1930 Keyhole Pull Both Sides
HB 1942 – Sliding Lock Set, HB 2010 Body, HB 1930 Keyhole One Side, Blank Outside
HB 1943 – Sliding Lock Set, HB 2010 Body, HB 1930 Keyhole One Side Only
HOW CAN WE HELP?
Need a schedule or quote?
Talk to us.