Skip to content

HB1220 Single Recessed Blind Extrusion

The HB1220 Blind Box Extrusion is a sleek blind system for flush mounting to ceiling plaster board (10mm or 13mm), primarily for automated roller blinds and screens.

Full Blind Box Extrusion – sold in 3m lengths only.

Sold in bundles 4 x 3m lengths

Materials: Extruded aluminium, available in raw unfinished aluminium only. Raw extrusion can be powdercoated or custom finished by client. We recommend cutting to size before colour finishing is undertaken to ensure edges are coloured and cutting does not chip powdercoating. For matching end caps please see the HB1225.

All Halliday + Baillie blind extrusion are sold in specific lengths. We do however supply these lengths longer than the stated purchase length. The additional amount is to cover any damage at either end to hold or jig the extrusion after either powdercoating or anodising. We strongly recommend cutting ends to provide a clean finish before colouring and/or installation.

Please note: blinds and any automation mechanisms are not included. If specifying for manual blinds, the cover flap will need to be approximately 30mm shorter at each end for the access cord. This is the responsibility of the client.

Minimum order: 1 bundle (4 x 3 metres = 12 metres)

For windows not spanning the whole wall space you will need end caps. HB1225 end caps sold separately.


You may also like


Need a schedule or quote?
Talk to us.

/ use our quick search to

find it fast

Newsletter signup

Get the latest news, product updates and information from H+B