%label%
%sku%%description%
- / Product overview
HB697 Body Only Receiver + End Pull to Match HB690 Sets
The HB 697 sliding door full body receiver with integrated end pull is specifically for use on bi-parting sliding doors.
The Body Only Receiver is often used where two sliding doors meet and a Halliday + Baillie Lock Set holds the two doors together. The advantage of the HB 697 over a standard strike plate is to allow for a matching push button pop out pull with exactly the same dimensions as the opposing lock set.
Please note: the HB 697 will match the lock body for the following lock and privacy sets only:
HB 690 Series
HB 695 Series
HB 1480 Series
HB 1490 Series
HB 1650 Series
On the passive leaf additional HB 660 Flush Pulls (sold separately), can be used with the HB 697 to match a HB 690 Series Lockset.
Material: Diecast zinc with brass and 316 stainless steel
Minimum door thickness : 38mm (if used with matching flush pulls)
Flush pulls : No Pulls Included
Suitable for timber or aluminium doors.
For finish options please see our current Finishes Sheet. Please check with your local Halliday + Baillie representative as not all finishes are available in all regions.
Flush pulls are designed to be mounted with the body within the thickness of the door, and the face plate on the door surface – total projection is 2mm. Fully recessed mounting is possible on timber doors with the appropriate door thickness. Using glue, epoxy or silicone products etc to secure flush pulls to the door is not required or recommended for installation, and may void warrantee. Glue, epoxy, or silicone products can be used to secure the spindle bar to the back of the snib flush pull for example where sets have a flush pull to one side only.
- / Product downloads
Resources
- / Related products