The deeper finger grip in the flush pull make these an ideal choice for thicker timber pivot/hinge doors, and being fabricated from zinc diecast allows for cost effective use in both commercial and residential projects. The set utilises the HB1920 or HB1930 flush pulls, and the HB2025 55mm backset deadbolt lock body. For a two prong sliding bolt version with 55mm backset please see the HB1970 Series.
Also available in 30mm backset (see the HB1950 Series).
Material : zinc diecast, solid brass
Backset : 30mm
Minimum door thickness : 38mm (technically these sets will fit in a door thickness of 32mm however due to their size and weight we recommend a minimum of 38mm)
Flush pulls : 250mm x 125mm x 15mm Suitable for timber doors.
Please Note: This is a run-out product. There is limited stock available, and once sold no more will be made. Please contact your local Halliday & Baillie representative for stock and finish information.
For finish options please see our current Finishes Sheet. Please check with your local Halliday + Baillie representative as not all finishes are available in all regions.
Glue, epoxy, silicone products etc are not required or recommended for installation, and may void warrantee.
HB 1970 – Sliding Lock Set, HB 2025 Body, HB 1930 Keyhole Pull Both Sides
HB 1972 – Sliding Lock Set, HB 2025 Body, HB 1930 Keyhole One Side, Blank Outside
HB 1973 – Sliding Lock Set, HB 2025 Body, HB 1930 Keyhole One Side Only
Need a schedule or quote?
Talk to us.