HB1480 D Series Large Pivot Door Privacy/Snib Set 55mm Backset

The HB1480 D Series has been developed in conjunction with the standard HB1480 Series sets. The main difference is the use of a dead bolt (with no integrated pop-out) rather than the traditional sliding lock body.

As with the standard HB1480 Series, the D series is ideal for use on large pivot doors where larger scale hardware is required.

The sets include solid brass 310mm flush pulls, and function on hinge, pivot and bi-fold doors and come as left or right handed, with various functions including a privacy option.

Material : Milled from solid brass
Backset : 55mm
Minimum door thickness : 45mm
Flush pulls : 310mm x 50mm x 15mm

Suitable for timber or aluminium doors (depending on the specific aluminium profile dimension)

For finish options please see our current Finishes Sheet. Please check with your local Halliday + Baillie representative as not all finishes are available in all regions.

Flush pulls are designed to be mounted with the body within the thickness of the door, and the face surface mounted - total projection is 2mm. Fully recessed mounting is possible on timber doors with the appropriate door thickness. Using glue, epoxy or silicone products etc to secure flush pulls to the door is not required or recommended for installation, and may void warrantee. Glue, epoxy, or silicone products can be used to secure the spindle bat to the back of the snib flush pull for example where sets have a flush pull to one side only.

HB 1485 – Privacy Set
HB 1486 – Snib In, Blank Out
HB 1487 – Snib In, No Pull Out
HB 1488 – Snib Both Sides

Product code: HB 1480 D

Please click here for the HB1480 D Series data sheet:AA HB1480 D.pdf
Please click here for the Halliday + Baillie Finishes Sheet:AA HBFinishes All.pdf