%label%
%sku%%description%
- / Product overview
HB1480 D Series Sets for Pivot/Hinge Doors - 310mm - 55mm Backset
The HB1480 D Pivot/Hinge Door Set series has been developed primarily for use on large pivot/hinge doors where function and scale are required.
With the extra deep one side grip, the sets can be used on bi-fold, pivots, and swing doors and also function for sliding doors see HB1480 series and come as left or right handed, with various functions including a privacy option.
All sets include the HB1475 310mm long Flush Pulls.
Material : Flush Pulls milled from solid brass, Lock Body Zinc diecast and brass
Backset : 55mm
Minimum door thickness : 45mm
Flush pulls : 310mm x 50mm x 15mm
Suitable for timber or large aluminium doors.
Available as a Privacy Set, and various snib only configurations.
For finish options please see our current Finishes Sheet. Please check with your local Halliday + Baillie representative as not all finishes are available in all regions.
Flush pulls are designed to be mounted with the body within the thickness of the door, and the face surface mounted – total projection is 2mm. Fully recessed mounting is possible on timber doors with the appropriate door thickness. Using glue, epoxy or silicone products etc to secure flush pulls to the door is not required or recommended for installation, and may void warrantee. Glue, epoxy, or silicone products can be used to secure the spindle bat to the back of the snib flush pull for example where sets have a flush pull to one side only.
Configurations:
HB 1485 – Privacy Set
HB 1486 – Snib In, Blank Out
HB 1487 – Snib In, No Pull Out
HB 1488 – Snib Both Sides