%label%
%sku%%description%
- / Product overview
HB1490 Series Sliding Door Sets – 310mm
The HB 1490 Sliding Door Set Series has been developed for use on large sliding doors where function and scale are required.
Each set includes the Halliday + Baillie 310mm long Flush Pulls in various configuration including a privacy option.
Material: Flush Pulls milled from solid brass, Lock Body Zinc diecast and brass
Backset : 55mm
Minimum door thickness : 45mm
Flush pulls : 310mm x 50mm x 15mm
Suitable for timber or aluminium doors
Available as a Privacy Set, and various snib only configurations.
For finish options please see our current Finishes Sheet.
Please check with your local Halliday + Baillie representative as not all finishes are available in all regions.
Flush pulls are designed to be mounted with the body within the thickness of the door, and the face plate on the door surface – total projection is 2mm. Fully recessed mounting is possible on timber doors with the appropriate door thickness. Using glue, epoxy or silicone products etc to secure flush pulls to the door is not required or recommended for installation, and may void warrantee. Glue, epoxy, or silicone products can be used to secure the spindle bar to the back of the snib flush pull for example where sets have a flush pull to one side only.
Configurations:
HB 1490 – Privacy Set
HB 1492 – Snib In, Blank Out
HB 1493 – Snib In, No Pull Out
HB 1494 – Snib Both Sides
- / Product downloads
Resources
Technical downloads
- / Related products