%label%
%sku%%description%
- / Product overview
HB1240 Part Recessed Blind Extrusion
The HB1240 Part Blind Box Extrusion is a blind system with sleek flush mounting to the ceiling gib (10mm or 13mm), primarily for automated roller blinds and screens.
Similar to the HB1220 Full Box Extrusion, the HB1240 is useful where space is tight, and a 120mm internal ceiling cavity is not available.
Blind Box Extrusion – sold in 3m lengths only. Cutting to length by client.
All Halliday + Baillie blind box extrusions are sold in specific lengths. We do however supply these lengths 80mm longer than the stated purchase length. The additional amount is to cover any damage to ends from the cutting process and to allow 25-40mm at either end to hold or jig the extrusion for either powder coating or anodising. We strongly recommend re-cutting ends to provide a clean finish before colouring and/or before installation.
Materials: Aluminium, raw unfinished. Raw extrusion can be powder coated or custom anodised by your preferred supplier. We recommend that clients cut to size on site before any finishing is undertaken.
No end caps are available for this product.
Blinds and any automation mechanisms not included. If specifying for manual blinds, the cover flap will need to be made approximately 30mm shorter at each end to allow for cord access. This is the responsibility of the client. For double hanging blinds for example where sheers and blackout blinds are required, please see the HB1260.
For orders under 3 lengths there will be a $50 packing surcharge!
LEAD TIMES APPLY: For New Zealand clients, if items are in stock in Auckland, a minimum 10 working day ‘pick and pack’ time usually applies. If items are not currently in stock lead times can be 12+ weeks. Please contact your local Halliday + Baillie representative to confirm current lead times.
BULK ORDERS: For bulk commercial orders of the this profile where larger quantities are required of a consistent dimension, please contact us directly as customised lengths can be manufactured dependent on order size.
PLEASE NOTE: It is the responsibility of the client to ensure that product requirements and quantities are checked before order. Due to the fragile nature of Blind Box in transit, coupled with our use of a 3rd Party Logistics provider to manage picking and packing of these products on our behalf, Halliday + Baillie are not able to accept returns for credit for blind box or cover flap extrusion lengths. This does not supersede any of our responsibilities under the Consumer Guarantees Act regarding replacements for faulty product.
- / Product downloads