%label%
%sku%%description%
- / Product overview
HB1650 Offset Flush Pull Lock for Sliding Doors
The HB1650 sliding door series has been developed primarily for use on large sliding doors where more grip is required.
This locking set features a completely flush snib inside and different flush pull configurations externally. Making it a simple fuss free options for sliding doors.
Material: Zinc die cast and brass
Backset : 55mm
Minimum door thickness : 46mm
Flush pulls : 250mm x 45mm x 15mm
Suitable for timber or aluminium doors.
For finish options please see our current Finishes Sheet. Please check with your local Halliday + Baillie representative as not all finishes are available in all regions.
Flush pulls are designed to be mounted with the body within the thickness of the door, and the face plate on the door surface – total projection is 2mm. Fully recessed mounting is possible on timber doors with the appropriate door thickness. Using glue, epoxy or silicone products etc to secure flush pulls to the door is not required or recommended for installation, and may void warrantee. Glue, epoxy, or silicone products can be used to secure the spindle bar to the back of the snib flush pull for example where sets have a flush pull to one side only.
Configurations:
HB1650 – Privacy Set, Snib In, Emergency Release Out, HB690 Standard Body
HB1652 – Snib Inside, Blank Out, HB690 Standard Body
HB1653 – Snib Inside, Nothing Out, HB690 Standard Body
HB1654 – Snib Both Sides, HB690 Standard Body
- / Product downloads